top of page
IMG_0429.JPG

NSR F1 86'-89'

SPIRIT OF THE CLASS

The 1986 F1 season saw engine manufacturers master all the intricacies of the complex 1.5 litre turbocharged regulations and dominate the grid with the most powerful engines the sport has ever seen. Too powerful to be accurately measured by the dynamometers of the day, it was thought that 1500 bhp was being regularly achieved in qualifying trim!


The NSR F1 86'-89' range of cars will be the basis of this class. 

BODIES

  1. No changes are allowed to the original car body supplied with the car.
     

  2. No lowering or weight reduction is allowed, though wing mirrors and aerials may be removed from cars.
     

  3. Spoilers must be firmly affixed to the car body before each race.
     

  4. Racing liveries are required, but can include fantasy liveries.
     

  5. Interior and driver figure as originally supplied with the car.
     

  6. Ballast may be added inside the car only. The car may weigh up to a maximum of 85 grams.

CHASSIS/MOTOR POD

  1. Chassis must remain standard as supplied with the car, no sanding or trimming to allow body rocking.
     

  2. Motor pod, red extra hard NSR 1283 as originally supplied with the car.
     

  3. NSR motor pod suspension kits may be fitted.
     

  4. Pinion 10t 5.5mm as supplied with the original car, NSR 7010.
     

  5. Free choice of NSR or Slot.it
    crown wheel.

WHEELS/TYRES

  1. Front wheels and tyres as originally supplied with the car, Zero Grip 18x10, part numbers 5020, 5283. Minimum diameter 18mm.
     

  2. Rear wheels as originally supplied with the car, Air-System 13x10mm. NSR 5021.
     

  3. Rear tyres, NSR Super Grip or Ultra Grip 19x13mm or 19.5x13mm.
     

  4. Rear tyres must have a visible NSR logo.
     

  5. All four wheels must have inserts fitted, as originally supplied with the car.
     

  6. Overall axle width must not exceed 68mm.

MOTOR

NSR Evo3 3023 21,400rpm as supplied with the original car. Complete with original pink wrapper.

OTHER PARTS

  1. Guide as originally supplied with the car, NSR 4841 or NSR 4859 Wood Track guide.
     

  2. Guides must be as supplied by NSR and unmodified.
     

  3. Axles, braid, eyelets, screws, and wires are free choice, as per club general racing rules.

TRACK VOLTAGE

13.8 volts.

GET IN TOUCH

1/14 Houldsworth Mill

Houldsworth St

Reddish

Stockport

SK5 6DS

07882 693 225 (Richard August)

  • Instagram
  • Facebook

© 2025 South Manchester Slot Racing Club

bottom of page